Roger PR302 Manual de usuario descargar pdf (Pagina 7)

PR302 v1.0 Installer Manual EN Rev. B.doc 8/19/2008

- 7 -

Connection terminals

Name Function

+12V Power supply plus

0V (GND) Power supply minus, also reference ground for inputs, RS485 and

CLK/DTA lines

IN1 IN1 input, internally pulled to supply plus through 5.6kΩ resistor

IN2 IN2 input, internally pulled to supply plus through 5.6kΩ resistor

IN3 IN3 input, internally pulled to supply plus through 5.6kΩ resistor

SHLD RS485 cable’s shield

RS485 A RS485 communication bus, line A

RS485 B RS485 communication bus, line B

CLK RACS Clock & Data interface, line CLOCK

DTA RACS Clock & Data interface, line DATA

TAMPER Tamper switch, line A, 24V/50mA rated

TAMPER Tamper switch, line B, 24V/50mA rated

IO2 IO2 transistor output 15V DC/1.0A

IO1 IO1 transistor output 15V DC/1.0A

REL1-NC REL1 output, normally closed contact, 24V/1.5A rated

REL1-COM REL1 output, common contact, 24V/1.5A rated

REL1-NO REL1 output, normally open contact, 24V/1.5A rated

Technical specification

Supply voltage 10-15 VDC

Current consumption

average 80 mA

Anti-sabotage Isolated contact, NC type, 50mA/24V rated, IP67

Reading distance UP to 12 cm for ISO card (depends on card type)

Cards EM 125 KHz (EM4100/4102 compatible)

Environmental class

(according to

EN50131-1)

Class I, Indoor, temperature: +5°C- +40°C, relative humidity: 10 to

95% (non-condensing)

Ingress protection IP 30

Dimensions 105 X 105 X 31 mm

Weight ~ 140g

Approvals CE

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Roger PR302 Manual de usuario Pagina 7